Fisher & Paykel

Fisher & Paykel OB60SC7CEX4

Answers and step-by-step fixes from the official Fisher & Paykel manual.

What does the display or indicator light show?

• Clock flashing: The clock needs to be set. This happens when the oven is first turned on or after a power cut. The oven will not heat until the clock is set.
• Temperature indicator lit: The oven is preheating. The light stays on while the oven heats up to the temperature you set.
• Cooking time indicator lit: Automatic cooking time is set. This light shows the oven has a cooking time programmed for automatic cooking.
• Automatic cooking stop indicator (A) lit: An automatic stop time is set. This light shows the oven is set to turn off automatically at a chosen time.
• Timer beeping, timer indicator flashing: The timer countdown has finished. The oven beeps every 7 seconds and the timer indicator flashes until you stop it. Note the timer does not turn the oven off.
• Cooking time and stop time (A) indicators flashing, oven beeping: Automatic cooking has finished. When the stop time is reached the oven turns off by itself and beeps every 7 seconds until you exit.

Common problems

The oven doesn't turn on

1. Is there power to the oven? Check the wall switch is on, the fuse has not tripped, and there is no power outage in your area.
2. Has the clock been set? The oven will not work at all until the clock has been set.

The oven light won't come on

1. Has the clock been set? The oven, and its light, will not work until the clock is set.
2. Has the light bulb blown? Replace the bulb using the care and cleaning instructions.

The oven isn't heating properly

1. Are you opening the door too often during cooking? Opening the door often during cooking lets heat escape. Keep the door closed and open it as little as possible.
2. Has the clock been set? The oven will not heat at all until the clock has been set.

The fan keeps running after I turn the oven off

1. Did the fan turn back on a few minutes after you switched the oven off? This is normal. If the oven is still above a certain temperature the cooling fan comes on by itself to cool it down.
2. Did you set a delayed start with automatic cooking? The fan running before the start time is normal. The oven itself will not heat up until the start time you set is reached.

Step-by-step guides

Set the clock

1. Wait for the display to flash when power is turned on or restored
2. Touch the - or + controls to set the time
3. Touch the cooking time and stop time controls together for 2 seconds to accept

Replace the oven light bulb

1. Let the oven cavity and grill element cool down
2. Turn the oven off at the wall before continuing
3. Unscrew the glass cover by turning it anti-clockwise
4. Carefully pull out the faulty halogen bulb
5. Fit the new bulb, holding it in a soft cloth
6. Replace the glass cover
7. Turn the oven back on and set the clock

Clean the catalytic panels

1. Wait for the oven to cool, then turn its power off at the wall
2. Wipe the panels with a damp cloth and a solution of hot water and mild detergent or an ammonia-based cleaner
3. Wipe dry with a soft cloth
4. For stubborn, baked on soiling, run the oven on Fan Grill at 200°C for 1.5 hours