Breville

Breville Juice Fountain BJE200

Answers and step-by-step fixes from the official Breville manual.

Common problems

Motor stalls or juicer is loud when running

1. Are you pushing food down too fast? Juicing too vigorously lets wet pulp build up under the cover, which can stall the motor.
2. Is the Nutri Disc locked properly into place? A loose Nutri Disc causes a loud noise. Turn off, unplug, take the juicer apart, and put it back together.

Not much juice comes out, or the juice is watery

1. Are you pushing the pusher down slowly? A slower pushing action extracts more juice from the fruit or vegetables.
2. Is the Nutri Disc mesh clogged? Remove the Nutri Disc, scrub the mesh walls with the nylon brush and rinse under hot water to clear it.
3. Are the mesh holes still blocked after brushing? Soak the Nutri Disc in hot water with 10% lemon juice to unblock the holes, or wash it in the dishwasher.
4. Is the spout blocked with pulp? Check the spout for blocked pulp if no juice is coming out at all.

Juice leaks or sprays out messily, or pulp builds up fast

1. Is juice leaking between the cover and the rim? Slow down how fast you push food through the chute.
2. Is juice spraying out of the spout? Slow down the juicing action to reduce spray from the spout.
3. Is pulp piling up fast inside the Nutri Disc? Stop juicing, remove the cover, scrape off the pulp, reassemble, and try alternating soft and hard produce.

Step-by-step guides

Clean the Nutri Disc filter

1. Rinse the removable parts under running water right away.
2. Soak the Nutri Disc in hot soapy water.
3. Hold the Nutri Disc under running water and brush the inside of the basket.
4. Hold the basket up to a light to check the mesh holes are clear.
5. If holes are still blocked, soak in hot water with 10% lemon juice.

Assemble the juicer

1. Place the motor base on a flat, dry surface.
2. Set the pulp container on the base so the spout lines up with the hole in front.
3. Line up the arrows on the Nutri Disc and push down until it clicks.
4. Lower the juicer cover over the Nutri Disc and pulp container.
5. Raise the safety locking arm and lock it into the grooves on the cover.
6. Slide the food pusher down the feed chute.
7. Place the juice jug under the spout.